Frequently Asked Questions
Find answers to commonly asked questions below.
There are plenty of ways to keep birds away from solar panels. Mesh, bird netting, spikes, wire, plastic owls, reflective tape, sonic devices. Some of them close the gap under your panels. The rest just try to talk birds out of using it.
That difference matters more than any other when you're choosing. This guide compares the main solar panel bird proofing methods, shows where each one works and where it falls short, and explains why a physical barrier usually wins on long-term results. Where costs come up, we describe relative levels only, because the real cost of pigeon proofing depends on your array.
Methods fall into two camps.

Clean-up has its place, because councils note that regular nest removal helps discourage persistent pigeons from nesting in the same spot over the long term. But it's a treadmill if nothing stops the birds coming back.
Mesh and netting both work by closing the gap. The difference lies in what they're made of and how they sit.
Mesh is generally a stiffer material, such as coated steel wire, that holds its shape and is clipped along the edge of the array. Bird netting is a lighter, more flexible material, often plastic, that can be fitted over or around a structure. You'll see both described in guides and by installers, and the words get used loosely, so check what's actually being sold.
Where each can fail:
For solar panels, we sell steel and stainless steel mesh, because we think a stiff, coated metal barrier is the better fit for a roof. Our Solar Mesh Kit uses a 0.7mm Q195 carbon steel core that's electro-galvanised and PVC coated, with half inch (about 12.7mm) openings, and clips through to the inside lip of the panel. If you want to know what to check on a mesh spec sheet, look at the material, coating and opening size.
Spikes and wire sit along ledges and panel edges and are meant to make perching uncomfortable. Decoys such as plastic owls, reflective tape and balloons rely on scaring birds. Sonic and ultrasonic devices try to annoy them away.

The track record is lukewarm. Noise machines, mirrors, plastic owls and fake hawks tend not to hold up, decoys can lose their effect as birds get used to them, and results from ultrasonic repellers vary. Spikes and repellents are cheaper, but not as reliable as mesh or netting.
They aren't useless. Spikes on a ledge or a rail can stop birds perching there. But the gap under the panels stays open, and a determined bird can nest right beside a spike.

| Factor | Mesh | Netting | Spikes and wire | Visual or sonic devices |
|---|---|---|---|---|
| How it works | Closes the gap | Closes the gap | Discourages perching | Tries to scare birds off |
| Pest exclusion (birds and rodents) | High, as a physical barrier | Moderate to high, if kept taut | Low, birds can nest around them | Low |
| Lifespan in Australian sun | Depends on the material and coating | Depends on the material and UV rating | Moderate | Low to moderate |
| Appearance | Discreet along the panel edge | Varies | Visible | Visible |
| DIY friendly | Moderate | Moderate | Moderate | Easy |
| Relative cost | Moderate | Lower to moderate | Lower | Lower |
These ratings are general guidance, not test results, and the right answer depends on the product. Use the table to work out what questions to ask.
The pest question is where the methods separate most. A deterrent is trying to change a bird's mind. A barrier takes away its options.
Rodents don't respond to spikes or decoys at all. Rats and possums chew wiring, and PVC insulation is no match for sharp teeth. If a sheltered gap is what lets them in, a barrier that removes the gap is a better answer than a device.
Possums are a different case again. They're protected native animals, and in NSW it's illegal to relocate or kill one, or trap and release one, without a licence. Exclusion is the right approach, which means sealing the entry point once you're sure the possum has left to forage. Never seal an animal in.
Add Australian heat, UV and salt air to the mix and material quality becomes a big part of the decision. Even the best method only works while it's intact.

Whatever you pick, the safety rules are the same. Safe Work Australia says falls from height are the major cause of death and injury in roof work and advises treating every roof as fragile. That's also worth weighing when you decide between DIY and a professional.
If you've decided on mesh, look at the Solar Mesh Kit or call us on 1300 032 760.
Nobody can give you an honest lifespan figure that applies to every roof, and we'd be wary of anyone who does. What we can say is what drives it.
Deterrents tend to be the shortest-lived answer in practice, not because they break, but because birds learn to ignore them. A physical barrier keeps working for as long as it's intact, which is why it pays to check it now and then.
A few patterns come up again and again.
That last one deserves a flag. If birds are already nesting, the nest needs removing first (wearing gloves, goggles and a mask), and you should be sure nothing protected is inside before you seal anything. If you're unsure, ask your state wildlife authority.
Yes, and sometimes it makes sense. Mesh around the array handles the gap. A few spikes on a nearby ledge or a rail can stop birds perching right next to it, which cuts down on droppings on the roof. Just don't expect the spikes to do the mesh's job.
What doesn't make sense is stacking several deterrents and calling it done. Three things that birds ignore are still things that birds ignore.
Ready to choose? Start with the mesh material and opening size, then work out the cost from your perimeter.
One practical point before you buy anything. Whatever method you choose, it only works while it is intact, so budget a few minutes now and then to look it over. A barrier that has come loose in a storm is just a decoration.
Mesh: Your corrugated roof Colorbond gutter guard kit comes with our durable Aluminium Gutter Guard Mesh. All kits are delivered in a gutter guard ...
View full detailsMesh: Your valley gutter guard kit for corrugated valleys comes with our durable aluminium mesh. It is delivered in roll form for easier installati...
View full detailsMesh: Your gutter guard for tiled roofs comes with our durable Aluminium Leaf Guard Mesh. It is delivered as a leaf guard mesh roll for easier inst...
View full detailsMesh: Your tiled roof valley guard kit for tiled roofs comes with our durable Aluminium Leaf Guard Mesh. Valley guard for tiled roofs is delivered ...
View full detailsMesh: Your Trimdek gutter guard kit comes with our durable Aluminium Gutter Mesh. All kits are delivered in a DIY gutter guard mesh roll for easier...
View full detailsFind answers to commonly asked questions below.